Two vehicles collided blocking Bakerview road, Acme WA
TrafficTwo vehicles collided near Bakerview Road, one was rear-ended. Both vehicles are blocking the road. Fire and emergency crews are responding. Nearby railway tracks are inactive, allowing safe access for responders.
Audio|Source: Whatcom County Sheriff, Bellingham and Western Washington University Police
01:54
Transcript:
00:00
Code 4[1]th. Code 41726.
00:04
Welcome to 2nd4 Hazard near Blue Canyon Road.
00:08
Board is (name withheld).
00:09
Both units are blocking trash, steamer, and Bakerview.
00:12
One was rear-ended.
00:13
Vehicles are blocking Bakerview.
00:14
Fire is also en route.
00:15
Other driver appears to be at fault.
00:18
Goody. Good. There's ever, I am.
00:21
Fix a mic. Good following.
00:23
Go ahead.
00:24
Subject awake, constantly breathing.
00:27
Okay. Thank you.
00:29
Give a specific address near Blue Canyon, I know it crosses that off the page ride.
00:34
It looks like it's closest to near Blue Canyon Road, and it looks like those tracks are run by Lake Watcomb Railway.
00:40
I got a hold of the owner of (name withheld).
00:42
He advised there are no active trains in the area this weekend, so it should be okay for a total response.
00:47
Perfect.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Code 4: Situation under control; no further assistance needed
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near Blue Canyon Rd, Acme, WA 98220
Correct
Incorrect
