Fire alarm triggered during HVAC work with no fire, Atlanta GA


Contractors working on the HVAC system triggered a fire alarm. No smoke or fire was found. The alarm system was set to test mode during the work.
Audio|Source: Atlanta Fire Rescue
00:16
Transcript:
00:00
There's no signs smoke with fire.
00:02
It's going to be some contractors working on the HVAC system.
00:06
The Trip the alarm.
00:07
Marta, representative, have been advised to put the system in test until the work has been completed.
00:12
You can show a 349[1]thaca service.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
349: Service
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near Richard Allen Blvd, Atlanta, GA 30331
Correct
Incorrect