Fire alarm trouble reported at multiple locations
Fire & ArsonThere were multiple fire alarm trouble signals at different locations on Waukegan Road and Tri-State International. No fire was found, but one alarm could not be reset and will be held for 72 hours.
Audio|Source: Chicago Suburban Fire Departments, MABAS and IFERN
01:52
Transcript:
00:00Be advised you the 550 years of your door.00:02Beardorf.00:04Go ahead, Red.00:15Reiserie alarms.00:17Regis received two trouble alarm[2]s, 2151 Waukegan, and 23455 Waukegan.00:27There's a power loss.00:29in the area here.00:31We are unable to reset the supervisory[1] at 2355.00:36Can you take it out of service for the supervisory[1] for a 72-hour hold? And we'll continue on to 2345.00:47Max, receipt, sir.00:492345 next.01:01for Supervisory.01:0525 Tri-State for the Supervisory.01:09Yeah, it's showing off there over here.01:18Yes, so the next one will be 75 Tri-State International and then 100 Tri-State International.01:25All right, 75 Tri-State was also showing normal 100 to 100.01:36I'll put you on there and clear that one and I'll send you to 100 trisade.01:44303 and 308 ambulance abdominal pain at 9121 chestnut drive
00:00
Be advised you the 550 years of your door.
00:02
Beardorf.
00:04
Go ahead, Red.
00:15
Reiserie alarms.
00:17
Regis received two trouble alarm[2]s, 2151 Waukegan, and 23455 Waukegan.
00:27
There's a power loss.
00:29
in the area here.
00:31
We are unable to reset the supervisory[1] at 2355.
00:36
Can you take it out of service for the supervisory[1] for a 72-hour hold? And we'll continue on to 2345.
00:47
Max, receipt, sir.
00:49
2345 next.
01:01
for Supervisory.
01:05
25 Tri-State for the Supervisory.
01:09
Yeah, it's showing off there over here.
01:18
Yes, so the next one will be 75 Tri-State International and then 100 Tri-State International.
01:25
All right, 75 Tri-State was also showing normal 100 to 100.
01:36
I'll put you on there and clear that one and I'll send you to 100 trisade.
01:44
303 and 308 ambulance abdominal pain at 9121 chestnut drive
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
supervisory: Fire alarm system supervisory signal (potential issue with system operation)
[2]
trouble alarm: Fire alarm system trouble signal (possible malfunction or error)
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near Waukegan Rd, Bannockburn, IL 60015
Correct
Incorrect