False fire alarm caused by faulty detector in Branford, Branford CT
Fire & ArsonFire department responded to an alarm activation on Carven Road in Branford, CT. The cause was determined to be a faulty detector. No fire was found. The homeowner will contact an electrician for repair.
Audio|Source: Branford Fire
01:49
Transcript:
00:00
On scene, engine 9-carven road command.
00:03
Received Engine 9 on scene.
00:11
Receive.
00:17
31, you can go, service.
00:23
31 in service.
00:26
Roger.
00:39
Related Rescue 2, we've got an adult male post-seizure hypoglycemia.
00:48
Recy, central calling rescue 2.
00:54
We're unreadable.
00:59
Roger, engine 9 is trying to relay that they have an adult male post-neutral hybrid
01:08
To us.
01:11
First part check.
01:14
All-par is counter for.
01:19
Roger, all-par, 1907.
01:26
We're all set out here.
01:28
It was caused by a faulty detector.
01:30
Homeowner is going to call for electrician tomorrow morning.
01:33
Have a straight note. All use could clear.
01:35
Command's terminated, car 1 and 2 in service.
01:39
A receipt command issue was due to a faulty detector.
01:44
The homeowner contact or electrician.
01:46
All fire units can clear.
01:47
Commands terminated cars 1 and 2 are off the year 1908.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Branford, CT
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
