Multiple fire detectors activate in Brookfield home, Brookfield CT
Fire & ArsonFire and EMS responded to multiple fire detector activations at a residence near Gallows Rd in Brookfield, Connecticut. No fire or hazardous conditions were found. Crews are continuing to investigate the cause of the activations.
Audio|Source: Brookfield Fire and EMS Dispatch
01:29
Transcript:
00:00
Safety, Brookfield, zero entry, zero readings on entry.
00:05
Roger, zero readings on entry.
00:13
21 Brookfield, going to Gallows, non-emergency.
00:19
Roger, 21.
00:21
Tadry 21.
00:26
TandW2, 9 gallons, Tand2 will take command.
00:32
Tandau 2 out, 9 gallons, can do a 2 will have GALO's command.
00:42
Safety 2, I'm going to go over the fireground.
00:49
Roofield in your five on with four, two gallons.
00:54
Roger, and your five on.
00:58
Two's out.
01:02
Two's out.
01:09
Command[1] of Brookfield.
01:11
Go from Brookfield.
01:15
Zero readings at this time.
01:20
We're investigating multiple detector activations that are not interconnected.
01:27
We'll be investigating further.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Command: Unit is establishing incident command
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Gallows Rd, Brookfield, CT 06804
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
