Fire alarm activated at commercial building in Buffalo


Emergency responders are checking a fire alarm at a business after it was triggered, but no fire has been found so far.
Audio|Source: Buffalo Police, Fire and EMS
01:49
Transcript:
Clear. Permanary signal for activated a commercial cloud alarm at (name withheld) between Peoria and Tonawanda, feel for engine 26 and... engine 36, 113[1] and B4-7. A preliminary signal, activated to push a fire alarm at 1-37. Arthur, between Peoria and Tonawanda. Let's go for engine 26, engine 36, 113, and B-4-7[2]. Your timing is 1542, Buffalo Fire. Carra's into the mic. Again, Carers, you just slow down going to... Niagara, all cars were down 425 Niagara. Dispatch 38 is back in service. 38 in. 47's responding. 47, you're responding. 137, you're responding, 137, Arthur, between Peoria and Tanawanda. Like that company says, it's (name withheld), and it's... to wet system water flow. He's a PS. 47, did they indicate if they got a runner coming? That's negative chief. We'll see if they get any runner here, fellow. 26 allocation, one story masonry, investigating. Alden Showing. 26 on location, one-story masonry, investigating nothing showing.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
113: Fire Response Unit
[2]
B-4-7: Fire Battalion Chief
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near Arthur St, Buffalo, NY 14207
Correct
Incorrect