Commercial fire alarm activated near Wallace Ave in Buffalo, Buffalo NY
Fire & ArsonA commercial fire alarm was triggered near Wallace Avenue in Buffalo. The alarm company reported activation in the basement and first floor. Multiple fire units responded, but no fire or smoke was confirmed.
Audio|Source: Buffalo Police, Fire and EMS
01:25
Transcript:
00:00
The preliminary signal[1] for an activated commercial fire alarm[2] near Wallace Ave.
00:04
That's between Hurdle and Windgate, Elkavere County.
00:06
Scope for engine 38, engine 34, ladder 7, and B47.
00:09
Preliminary signal for an activated commercial fire alarm[2] near Wallace Ave that's between Turtle and Windgate in Elkavere County, scope for engine 38, engine 34, ladder 7 and B47, time out 11.04 hours Buffalo fire.
00:23
Amherston Elmwood 308 you're responding from Amherston Elmwood.
00:27
38 to 34, we'll probably beat you there.
00:35
Copy.
00:36
47's responding.
00:41
P-47, you're responding near Wallace Ave, between Hurdle and Wingate.
00:46
At Elkavere County, alarm company reported a basement and first floor fire alarm activation.
00:51
You have a PS.
00:52
Dispositions 47 keys and then to my cad.
00:53
Affirmative, Chief, looks like you are showing off the line.
00:56
We'll resend it again.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
preliminary signal: Indicates an initial alert for a fire alarm
[2]
activated commercial fire alarm: Alarm triggered at a business address
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near Wallace Ave, Buffalo, NY 14216
Correct
Incorrect
