Fire alarm malfunction found at building on S Elmwood Ave, Buffalo NY
Fire & ArsonFirefighters responded to a fire alarm at a building near South Elmwood Ave, Buffalo. After checking, they found no active fire. The alarm was malfunctioning on the fourth floor.
Audio|Source: Buffalo Fire
02:41
Transcript:
00:00
4-4, under 2.
00:04
Go into 2, there's 4-4.
00:09
Chief, we're at Hudestack right now.
00:11
We've got no active fire, but we're showing something on the fourth floor.
00:17
On trouble alarm, we're going to go check it out.
00:19
Engine 2 received dispatches 4-4 and a whole company is at near South Elmwood Ave.
00:24
Investigating on location, establishing command.
00:28
Pizer 4-4 are on location, establishing command of the fourth floor.
00:32
All right, good.
00:34
The dispatcher-2.
00:35
If you want company to say there was a runner on location, someone did activate the alarm.
00:42
They came in as a digital dialer.
00:44
To dispatches 4-4, do we ever want to come on our communication?
00:47
They came in and there's a digital dialer.
00:49
We'll see if they can get a hold to somebody.
00:51
The fire, Chuck 7-N-N.
00:53
Check 7-N. 4-4, then you get 4-4.
00:57
Go and you do this is 4-4.
00:58
Chief, no signs of fire up here.
01:01
We're going to call it a trouble alarm, but hopefully malfunctioning.
01:04
Not a fire. Engine 2 up here, received.
01:05
Dispatch, we go to malfunctioning in near South Elmwood Ave.
01:08
We need to run a reset for a box.
01:09
That paper companies give the direct report.
01:11
440s in.
01:12
Roger 4-4 malfunction.
01:13
Checking up the report, we're attempting to get a hold of somebody now.
01:16
You're in service.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near S Elmwood Ave, Buffalo, NY 14201
Correct
Incorrect
