Fire alarm triggered at Pioneer Metal Finishing; no fire found, Chippewa Falls WI
Fire and EMS responded to a fire alarm at Pioneer Metal Finishing near Palmer St in Chippewa Falls. The alarm was triggered by the east heat detector. After communication with a keyholder who provided proper identification, crews confirmed there was no actual fire and the call was canceled.
Audio|Source: Chippewa County Sheriff and Chippewa Falls Police
01:38
Transcript:
00:00
City Fire City law you requested near Palmer St near Palmer St at Pioneer Metal finishing for a fire alarm going off in the building showing east heat detector was called in the alarm company no contact on site yet due to contacting us first at 1557
00:29
City Fire City EMS here requested near Palmer St near Palmer St for a fire alarm going off at Pioneer Metal Finishing, showing East Heat Detector, no contact on site yet due to contacting us first at 1557.
00:53
Chippewall, Venge 2 responding, near Palmer St.
00:56
And C-2 will be responding.
01:00
Two units, copied engine 2 responding.
01:06
All speed responding.
01:07
All speed responding.
01:11
Then for engine 1, medical 1 and G3.3.
01:15
Will Falls, Medicaid County, Medicto will be responding as well.
01:19
Okay, and for a medicute.
01:22
County to all units responding to Palmer Street.
01:31
You can disregard keyholder gave proper ID to cancel.
01:35
Again, you can disregard keyholder gave proper ID to cancel.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Palmer St, Chippewa Falls, WI 54729
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect