Disclaimer
Information CrimeRadar provides is made available solely to protect the public. Using this information to harass, threaten, or harm anyone is prohibited. Information is provided by third parties and may have errors. We cannot guarantee the accuracy, completeness, or timeliness of the information. Location data may not be 100% accurate. Use extreme care and always verify information through official sources and exercise caution and judgment when using CrimeRadar. By clicking continue, I agree I have read and understand the above and agree to these terms and conditions.

Fire alarm triggered by cooking with no fire presentHigh Point NC

audio iconFire & Arson
High Point, NC

A fire alarm was activated by cooking activity in a kitchen at a facility in High Point, NC. There was no actual fire or danger found on site.

Audio|Source: High Point Fire Department Dispatch
04:11
Transcript:
00:00
Engine 12, I've got a vehicle up here waving us on.
00:02
If you want to follow them, we're going to stay right here.
00:04
10-4[1]. This black vehicle in front of you.
00:07
10-4[1]. 10-4. So on a command, you copy, we've got workers out here waving us in.
00:12
I have a sound of issues.
00:17
I'll make it get a long-terminer up at (number withheld).
00:21
Any unit on the scene copy him? Is there active fire?
00:24
Port digging, you're going to have to get near a wind that we can't copy you.
00:28
Engine 12, could you head down towards the laundry room with him?
00:30
Jet 4, we're heading around at the back of the building now.
00:33
We've got personnel taking us back here.
00:35
Truck 4 still staged at the lynx and John Knox.
00:38
They're doing road work through here is going to be tight.
00:40
Engine 14, are you able to get out on traffic? Can you repeat your last if you can?
00:44
We're making our way to the laundry room, with having radio issues.
00:48
Temple, they're heading your way as well, just in case you can't get out.
00:52
14 cops.
00:53
The H-12 is out, we'll be out investigating.
00:55
Tenful. Engine 12 to command.
00:57
Go ahead. Command. We've located the activated the detector detector.
01:00
They were trying some food down here in a kitchen and set off the detector.
01:05
There's no fire problem.
01:06
For 14 to injury 12.
01:08
Is it 12 to command?
01:09
Go ahead for command. Tenfor, they're done with their cooking down here.
01:12
One of the people can try to resist this thing.
01:14
We may have to reset the tape.
01:16
Make the cookie down.
01:17
We can get it by heaven we need to.
01:19
T.4, are you inventing us right now?
01:20
Hey, they're right here in the area, though, they're calling them back down here.
01:25
Ken, four, what are you going to be?
01:26
Ken, four. It's going to be the kitchen right next to where the maintenance keeps their vehicles down.
01:38
12 do you have a detect before i do it's n2 m196 nora 2 mike 196 that's one that's one with it that's the only one showing all the power
02:01
10.
02:02
If you can, you can attempt to reset.
02:06
Just a back to the trouble.
02:07
For 14,
02:08
did you get a reset?
02:09
1040, that's reset.
02:10
10.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgment / OK

Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.

Location mentioned:
High Point, NC

This shows a Google Street View of the area near the location, which might not be the exact address.

Correct
Incorrect

Explore More on High Point, NC Crime Map

Recent Fire & Arson Incidents in High Point, NC

Explore the crime map for more.