Fire alarm at warehouse triggered by power issues, Holland MI
Fire & ArsonFire units responded to a fire alarm at a large warehouse near Washington Rd. There was a water flow alarm activation, but no visible fire was found. Firefighters investigated and found the alarm was likely triggered by power problems affecting the system.
Audio|Source: Allegan County Police, Fire and EMS - Conventional / Digital
02:44
Transcript:
00:00
Central graph at fire respond for a fire alarm near Washington Rd near Washington Rd alarm is showing in zone 24 water flow system fire provides and clear and page social clear at 159 train.
00:20
Central Grasp is clear to call and enroll
00:25
1520
00:28
We're going to be around to South Haven. We're going to be around to South Haven.
00:41
We're 1620.
00:46
We'll be clearing the land and returning to quarters.
00:53
Clearing available, 1520.
01:00
712 will be an all-a-one at 1521 I'm sure from 701 701
01:21
This got a text from one of our firefighters in the area.
01:24
It sounds like there's been some power issues so that could be what's causing the alarm.
01:32
We'll be on seeing here in a minute.
01:34
Check.
01:36
10-4[1].
01:39
That's 9-61.
01:43
Control from 961.
01:48
9671. On Steam.
01:53
1523.
01:59
Looks good, let's pull off up here and shut them down.
02:06
10-4[1].
02:16
from 701. Go ahead.
02:23
On scene of a large warehouse,
02:27
nothing showing from the A, B, or C side,
02:31
701, a half command will be going into investigate.
02:35
15.4.
02:40
The 712 aren't seen staged by the APC.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgement / Message received
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Washington Rd, Holland, MI 49423
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
