False alarm due to malfunctioning smoke detector, Jersey City NJ
Fire & ArsonFire crews responded to an alarm activation near Summit Ave. Investigation revealed a malfunctioning smoke detector on the first floor hallway. No fire was present. The detector was reset and false alarm confirmed.
Audio|Source: Jersey City Fire
01:43
Transcript:
00:00
Dispatch engine 11 is on the scene near Summit Ave have a three-slery frame attached on both sides, nothing showing where investigating, establishing command.
00:08
We're investigating, establishing command. We're receiving engine 11 here on the scene, a stopching Cumbet Avenue command.
00:11
The advice from the caller said the alum has been going on and off on the first floor in the hallway.
00:26
We have a cold detector activation in the first four hallway.
00:29
I'll get investigating for it.
00:30
They'll give you more in a minute.
00:37
Thank you. Thank you.
00:43
Thank you. Time 3 is on the scene, I'll be coming up.
00:47
Thank you, the time 3 around scene is swimming, Summit Avenue command.
00:58
Command from Engine 11.
01:00
We have a malfunctioning smokehead on the first floor.
01:03
There's no alarm panel.
01:04
There's hard wire with a battery backup.
01:06
We're going to attempt to take it down and reset it.
01:16
Come here, Steve.
01:27
This session, 7th Avenue command is the malfunctioning detector.
01:32
It's going to hold engine 11, Ladder 7 to return a balance.
01:37
Regis, holding as an 11 ladder 7 at Box 486.
01:40
Enter 14 to 103.
01:41
You're back in service.
01:42
Switch your Mac to dispatch one.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Summit Ave, Jersey City, NJ 07307
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
