Residential fire alarm triggered by drilling, no fire found, Lockport NY
A residential smoke alarm was activated on the second floor near Earring Drive. The cause was drilling through a rafter, with no fire confirmed. Fire units responded and addressed the situation.
Audio|Source: Niagara County Public Safety
01:15
Transcript:
00:00
Fire Control South Lapport, residential fire alarms, near Earring Drive, showing it as the second floor smoke detector and spin FDTEC 1.
00:12
48, Rob.
00:15
Tony to Zonate.
00:18
He's back.
00:20
Repeating to South Blackport fire alarm activation, residential,
00:24
near Aron Drive between Fuel Drive and Jennifer Drive, showing as a second floor smoke detector,
00:31
instant FDTAC 1 for until Clear 1626.
00:35
Zone 8. 10-4[1].
00:38
Near Aaron Drive for the fire alarm.
00:42
Zoni, copies.
00:48
One, go on.
00:50
Salvo. Thank you.
00:57
Thank you so.
00:58
Where are you inch and four?
01:02
Measure 4.
01:08
This was a smoke alarm to the sun off by drilling through a rafter.
01:13
A lot of panels have been reset.
01:14
We're in service or turning.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgment or affirmative; message received and understood.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Lockport, NY 14094
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect