Apartment fire alarm triggered by construction work, Milwaukee WI
Fire & ArsonA fire alarm was triggered at a four-story apartment building near 4th Street in Milwaukee. Upon investigation, it was found that the alarm was caused by smoke from construction or roof maintenance work. The alarm was reset and no fire incident occurred.
Audio|Source: Milwaukee County Public Safety - South Suburbs
05:17
Transcript:
00:00
This match is 23 is Bruce Command[1]way, a four-story apartment building up and show and investigating. The message received, Bruce Command, near 4th Street, building up to show and investigating.
00:15
Section 30 as well.
00:18
Message 17. Message 17.
00:32
The crash one check, county, have you allowed in the clear, and dark.
00:39
County Dispatch, this is 128 on your dispatch channel. We read over there.
00:45
It did not ring. Can you relay that to the tower, please?
00:49
One 20th just came over a radio since they can't get the call yet.
00:54
Okay.
01:09
Thank you. Thank you. Thank you. Transportation 1, St.
01:17
Luke's.
01:29
1671 desk.
01:32
Go ahead.
01:35
1041. I'll be in squad, 17. I'll be heading up to court.
01:41
1041.
01:43
1041. One trying, desk.
01:53
Go ahead. Go ahead.
02:04
104 4256
02:07
Dispatch 2.
02:18
Dispatch to 351.
02:22
One nineteen next.
02:25
Go ahead.
02:33
129 is this active or delay?
02:38
Oh,
02:42
it's been on.
02:46
129 is this active or delayed?
02:51
They left. It happened within the last few minutes.
02:55
No need for another.
02:56
I don't have a vehicle description or anything yet. They're getting that info.
03:00
Time 4-119, copy.
03:02
Yeah, I'll just be in the area if he just comes up with a suspect quick.
03:06
I'm just down the road.
03:09
Time for him.
03:24
Engine 28, on scene.
03:32
The message receipt in 28.
03:35
Next Street, Command[1], go ahead.
03:42
The alarm was set off by smoke detector caused by construction company doing some demo.
03:50
Alarm has been reset.
03:52
Units will be picking up shortly.
03:55
Such as you see.
04:03
10-4.
04:09
129, whatever you said didn't come through again,
04:12
at least on the SWAT end of the radio.
04:18
You can, 22, there is no actual theft.
04:22
Well, then anything copy.
04:28
Dispatch some more of the crossings will be handling that.
04:32
10-14-51 and Ramsey starts at 820.
04:38
Temple.
04:46
Mr. Millero Command[1] to Dispatch, we're going to take no cause for alarm, return in all companies.
04:52
Mr. McClend,
04:54
no cause for alarm, all companies return.
05:07
Those ones.
05:11
Message, Ruth command, maintenance working on roof, set off the alarm, no pause.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Command: Incident Command established for managing the incident
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
S 4th St, Milwaukee, WI
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
