False fire alarm caused by stove smoke in Monroe home, Monroe NC
Fire & ArsonFirefighters responded to a fire alarm near Murgensur Way in Monroe. The alarm was triggered by smoke detected from the stove in the downstairs hall. Upon arrival, no fire was found. The alarm was a false alert caused by stove smoke.
Audio|Source: Union County and North Carolina State Fire
01:57
Transcript:
00:00
Station 23, Station 51, en route to the fire alarm near Murgensur Way.
00:06
Sitting by an alarm company.
00:11
It's just an audible fire.
00:12
Zone downstairs hall.
00:19
Go ahead.
00:22
21 clear.
00:24
Two more.
00:25
See,
00:31
Com, Agent 51's on the scene. We've got a home all right up front. We've got a two-store residential structure, no sizzle from Division A. 51 or half command will be investigated.
00:41
10-4[1].551 on seeing nothing visible.
00:52
Reggie, 23, sir.
01:00
Agent 51,
01:02
you can operate on those.
01:10
51 to 23 we can handle as you can clear.
01:17
A lot of 23 is available.
01:22
The rescue 23 is clear.
01:25
Two more.
01:31
798, sit down.
01:34
Good. Good.
01:35
Point it, clear.
01:38
104.
01:44
C515.
01:47
Go ahead.
01:49
Great on the stove, smoke detector activation, all 20, correction, all 51 units, time to complete.
01:56
24, thank you.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgment / OK
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Monroe, NC
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
