Fire crews respond to smoke at commercial building 

Transcript:
AMR, Commercial Structure Fire at 410 Capitol Way North. Cross Street is between Thurston Avenue Northwest and A Avenue Northwest. Let me reach out the fire and see if they have an update for the 4-4 if people can go home. Thank you. Zero three, trial, four, seven, close, and rose. John, 47. Command, from Capitol. Go for command. Law enforcement's wondering if the occupants from the fourth floor can return. Negative, not until we get it all clear on all floors in the smoke evacuated. Preachete. I'm sure. Okay, in the alleyway? Offer. Okay. It's asking to hold tight there. They're waiting for an all-clear on apartments before they can move them back in. Copy that. 246 Radio. The tiny one says, no, they've only cleared the second floor, but still don't want anyone going back until it's fully ventilated. Copy. Two, Charles 17. Go ahead. The numbers there's going to this call now, clear at east. 17, clear. 40, I'm also cleared and out to the second ounces. 40 to the theft. Good. 8.4 arriving, 010. County, Plummer Street Southeast. Cross Street is between Lily Road South East and Weir Street Southeast. Command Copies Engine O2. You have an all-clear on the second floor with two occupants remaining in their units. Is there any residual smoke? Do we need ventilation up in that floor? No, floor two's good. Command copies, floor two, clear. I read the ATL, you can clear it. Thank you. Go for command. Yeah, we got a all clear on four four. There were still some occupants in their rooms, but their rooms were clear smoke as well. There's just a little bit of residual in that hallway. We're going to work on ventilating that now. Command copies. You have an all-clear on the fourth floor. A couple residents still in their units, but no smoke, and you're working on a ventilation plan for the fourth floor. I'm fine out until all time. Copy, perfect. Command copies, Injj 31. You have an all-clear on the first floor. One resident refuses to evacuate. You have some light smoke. Can you address that smoke with your ventilation fan, please? Command from Engine 3. While we were doing the call clears, I just have to reset. We have a good reset on the surface.

Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.