Smoke alarm triggered by construction dust at commercial site, Pelham NH
Smoke and fire alarms were activated at a one-story commercial building near Main Street. Upon arrival, responders found no fire or smoke but identified that construction dust caused the alarm activation.
Audio|Source: Pelham Fire and EMS
02:6
Transcript:
00:00
Building near Main Street,
00:03
1-2, the Tower,
00:06
Rescue 1, Battalion, 3 is Zone 2,
00:10
basement,
00:11
whole stations, and smoke detectors. Time to block is in 50 seconds.
00:15
5 o'clock. The street.
00:22
Carpool is responding, one of nine hours in the street.
00:29
Okay,
00:31
I have NG1-129-Arenton Street.
00:34
NG-1-N-E-1-0-9-Arenton Street.
00:42
Okay.
00:46
Fire Zoning 2,
00:49
basement, pole stations, and smoke to Texas.
00:52
Let me see you, thank you.
00:57
By Calfors on Cine, they have a one-story commercial building.
01:02
There's nothing showing.
01:04
You're investigating Calford off command.
01:09
Calford, you can't investigate one-story command and show on you have command.
01:19
24-5, engine two zones here.
01:23
Engine 2 is on scene, Arlington.
01:31
Three, you're at the box, I'm control on three sides.
01:34
The company is the channel two package.
01:40
Go on, one, let's see.
01:45
Engine 1, you're on scene, Arlington.
01:52
Main Street Command, Firearm.
01:55
Road Street Command.
01:57
We're going to Holder Central,
01:58
dust from workers.
02:02
Holder Central Company is dust from workers. Engine 2 in the tower are servers. I have another.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Main St, Pelham, NH 03076
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect