False fire alarm activated at building in Santa Barbara County, Santa Barbara County CA
Fire & ArsonA fire alarm was activated at a building near East Main in Santa Barbara County. Responders found no hazard. They were unable to reset the alarm, so the site was turned over to an on-site contact who will stay until the alarm company arrives to fix the system.
Audio|Source: Santa Barbara County Fire District
00:45
Transcript:
00:00
Engine 5 starts the building near East Main.
00:02
We're UTL[1] on any hazard.
00:05
We were also unable to reset the alarm.
00:08
However, we're turning the site over to the on-site contact with Eric who will remain on scene until the alarm company comes out to troubleshoot the system.
00:24
Agent 5, I copy UTL[1] no hazard.
00:26
Unable to reset the alarms, Eric will remain on the scene to troubleshoot and wait for the alarm company.
00:35
By engine 5, we're going to be off incident and be advised, you might get another alarm for this, but break.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
UTL: Unable to find the person, vehicle, or item referenced in the call or report.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Santa Barbara County, CA
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
