Fire alarm triggered by faulty detector in Simsbury


Fire crews responded to an alarm at a property in Simsbury. A key holder confirmed that the fire alarm was activated due to a faulty smoke detector, with no smoke or fire found.
Audio|Source: Simsbury Fire Dispatch
04:9
Transcript:
Standby for talent detention district 5, 8, Wilcox Street. folder has been notified. Cross Streets. The duty officer is going to be F-35[1]. The primary alarm is going to be 1905. It's a very engine 6. This is 838 responding. 38. I got a key holder who just called that he spoke to the fire marshal. This week, it's a faulty, total cell. He said that the alarms are activated. There's no smoke or fire right now. This is right. 24 is responding. Covering in 35. 24, you respond. You copy my message. Engine 2 responding with 3. Engine 2 with 3. Engine 2 with 3. Engine 8 responding with 4. 8.8 with 4. from the outside will be out checking. Yeah, you'll be out checking, 1912. This is very 24 will be on scene. 24 is on scene. 24 will have... Say they were responding? Yeah, it's the firm. It's the owner. He said he was on his way down there. Town for it. Handel. Hey, let me know what you mean up with the property manager. confirm it's a faulty detector and I can hold it to just you guys. Yeah the alarm says smoke photo detector same as last time. Okay ten four so we'll hold it to engine eight only. All right save per F24[2]'s command holding it to engine eight Wilcox street all their companies can return the service we're going to try to restart reset here
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
F-35: Fire duty officer identifier (not a specific code)
[2]
F24: Fire unit identifier (not a specific code)
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Wilcox St, Simsbury, CT 06070
Correct
Incorrect