Jackknifed truck blocks I-20 exit ramp in Texas
TrafficAn 18-wheeler truck has jackknifed and is blocking the exit ramp at I-20 near Highway 14 in Texas. Traffic control and a heavy wrecker response are needed to clear the area.
Audio|Source: Smith County Emergency Communications
02:13
Transcript:
SX. SX. I'm aware that motors assist. Can we see a DPS can assist until we get some people? Stand 4. The unit is out to a road hazard. It's I-20 mile mark or 5-6-2 eastbound. It's the exit ram of 14 at... I-20 Marmarker 5-6-2 eastbound reports of an 18-moving jackknife. Need a blocker for road traffic control. County Clear 634. Dispatch, DSD 1138. I'm on location of this. 18-Ruith jackknife across Lexington, Brown. If you can, go and give me the Isaacs in route. It's them with a heavy wrecker for the 18-wheeler driver. And the X-Ramp is completely blocked. Any Red Springs, Senator 121, Blocker 121 is in route. And for heavy-in-roadhead, 636. Great friends, Tim. Mark Toe, you're going to head with them, make a circle on diving the road. Put your blocker, the closest to the interstate, and bring the fender up here next to my vehicle. I've got ice that's coming around with her heavy. Receive, where's it up? We're told about a six years. Get to I-20, head west now, go to Lavin Road, make a circle, and come back to the exit ramp that comes on the 14. You'll see my truck and 18-wheeler's already stopped.
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
I-20, Texas
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect