Fire alarm sounding in building with no fire found, Wake County NC
Fire & ArsonA fire alarm sounded in building 103 in Wake County, NC. Maintenance personnel are on site trying to reset the alarm panel, which is malfunctioning. No actual fire or hazardous condition was found.
Audio|Source: Wake County Fire
01:33
Transcript:
00:00
It's kind of where we went. See if you can get his alarm to reset.
00:02
Light 1-1, we have no slow condition in 103.
00:04
All clear. Sure. Take quarters to engine 12 on tax 15.
00:06
Yes.
00:07
I'm getting no answer on callback to the involved driver.
00:09
Have you made contact with anybody?
00:11
Negative. We've made a loop throughout the neighborhood that hadn't located anything.
00:14
RPD has done the same as well.
00:16
We're going to return.
00:17
All right, so far.
00:18
I will keep an eye on and try to call back.
00:20
Proceed. Magnix 60.
00:22
You copy direct. K-4MaticC copyright, we're in service.
00:24
Go ahead, WC1.
00:26
Yeah, you should be good.
00:27
We still got an audible alarm in 103.
00:29
Cut off. It is just ensure that the panel is showing normal status.
00:33
And I'm going to come down to get maintenance number.
00:35
Copy that. Panel still will give us problems.
00:37
He just silenced it.
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Wake County, NC
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
