Fire alarm activated at residential location in Yakima


A fire alarm was activated at a home in Yakima. Fire crews arrived but found no active fire and are investigating the situation.
Audio|Source: Yakima City / County Police, Fire and EMS, Washington State Patrol
01:30
Transcript:
00:00Standing Road for residential fire alarm.00:02Station 42, Station 40 Respond 110, North Station 40, residential fire alarm, 1301[2].00:11Valley Fire, engine 42 is around.00:15Engine 42 at 1301[2].00:48with a pheno on site with an improper passcode.00:59Great, see, we're just about there.01:0413-03.01:17Single story, what frame, nothing showing, um,01:22investigating. Engine 4830.30.
00:00
Standing Road for residential fire alarm.
00:02
Station 42, Station 40 Respond 110, North Station 40, residential fire alarm, 1301[2].
00:11
Valley Fire, engine 42 is around.
00:15
Engine 42 at 1301[2].
00:48
with a pheno on site with an improper passcode.
00:59
Great, see, we're just about there.
01:04
13-03.
01:17
Single story, what frame, nothing showing, um,
01:22
investigating. Engine 4830.30.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
13-033: Fire Alarm
[2]
1301: Street number or code for incident location
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Yakima, WA
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect